[English]

Yocto Project Terms

Getting started in Yocto can be overwheming. There are many terms used that are specific to Yocto and Bitbake environment.

A list of terms and definitions users new to the Yocto Project development environment might find helpful can be found here.

Yocto Variables Glossary

This chapter lists basic variables used in the LVGL Yocto guide and gives an overview of their function and contents.

A More complete variable glossary can be found in Yocto Variable Glossary. This section covers a lot of variables used in the OpenEmbedded build system.

S

The location in the Build Directory where unpacked recipe source code resides.

By default, this directory is ${WORKDIR}/${BPN}-${PV}, where ${BPN} is the base recipe name and ${PV} is the recipe version. If the source tarball extracts the code to a directory named anything other than ${BPN}-${PV}, or if the source code is fetched from an SCM such as Git or Subversion, then you must set S in the recipe so that the OpenEmbedded build system knows where to find the unpacked source.

As an example, assume a Source Directory top-level folder named poky and a default Build Directory at poky/build. In this case, the work directory the build system uses to keep the unpacked recipe for db is the following:

poky/build/tmp/work/qemux86-poky-linux/db/5.1.19-r3/db-5.1.19

The unpacked source code resides in the db-5.1.19 folder.

This next example assumes a Git repository. By default, Git repositories are cloned to ${WORKDIR}/git during do_fetch. Since this path is different from the default value of S, you must set it specifically so the source can be located:

SRC_URI = "git://path/to/repo.git;branch=main"
S = "${WORKDIR}/git"

D

The destination directory. The location in the Build Directory where components are installed by the do_install task. This location defaults to:

${WORKDIR}/image

备注

Tasks that read from or write to this directory should run under fakeroot.

B

The directory within the Build Directory in which the OpenEmbedded build system places generated objects during a recipe's build process. By default, this directory is the same as the S directory, which is defined as:

S = "${WORKDIR}/${BP}"

You can separate the (S) directory and the directory pointed to by the B variable. Most Autotools-based recipes support separating these directories. The build system defaults to using separate directories for gcc and some kernel recipes.

WORKDIR

The pathname of the work directory in which the OpenEmbedded build system builds a recipe. This directory is located within the TMPDIR directory structure and is specific to the recipe being built and the system for which it is being built.

The WORKDIR directory is defined as follows:

${TMPDIR}/work/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR}

The actual directory depends on several things:

  • TMPDIR: The top-level build output directory

  • MULTIMACH_TARGET_SYS: The target system identifier

  • PN: The recipe name

  • EXTENDPE: The epoch — if PE is not specified, which is usually the case for most recipes, then EXTENDPE is blank.

  • PV: The recipe version

  • PR: The recipe revision

As an example, assume a Source Directory top-level folder name poky, a default Build Directory at poky/build, and a qemux86-poky-linux machine target system. Furthermore, suppose your recipe is named foo_1.3.0-r0.bb. In this case, the work directory the build system uses to build the package would be as follows:

poky/build/tmp/work/qemux86-poky-linux/foo/1.3.0-r0

PN

This variable can have two separate functions depending on the context: a recipe name or a resulting package name.

PN refers to a recipe name in the context of a file used by the OpenEmbedded build system as input to create a package. The name is normally extracted from the recipe file name. For example, if the recipe is named expat_2.0.1.bb, then the default value of PN will be “expat”.

The variable refers to a package name in the context of a file created or produced by the OpenEmbedded build system.

If applicable, the PN variable also contains any special suffix or prefix. For example, using bash to build packages for the native machine, PN is bash-native. Using bash to build packages for the target and for Multilib, PN would be bash and lib64-bash, respectively.

PR

The revision of the recipe. The default value for this variable is "r0". Subsequent revisions of the recipe conventionally have the values "r1", "r2", and so forth. When PV increases, PR is conventionally reset to "r0".

备注

The OpenEmbedded build system does not need the aid of PR to know when to rebuild a recipe. The build system uses the task input checksums along with the stamp and shared state cache mechanisms.

The PR variable primarily becomes significant when a package manager dynamically installs packages on an already built image. In this case, PR, which is the default value of PKGR, helps the package manager distinguish which package is the most recent one in cases where many packages have the same PV (i.e. PKGV). A component having many packages with the same PV usually means that the packages all install the same upstream version, but with later (PR) version packages including packaging fixes.

备注

PR does not need to be increased for changes that do not change the package contents or metadata.

Because manually managing PR can be cumbersome and error-prone, an automated solution exists. See the "working with a pr service" section in the Yocto Project Development Tasks Manual for more information.

PV

The version of the recipe. The version is normally extracted from the recipe filename. For example, if the recipe is named expat_2.0.1.bb, then the default value of PV will be “2.0.1”. PV is generally not overridden within a recipe unless it is building an unstable (i.e. development) version from a source code repository (e.g. Git or Subversion).

PV is the default value of the PKGV variable.